AGLGates عربي Get prices
Home / Gate remote controls

Gate remote controls

433 MHz learning-code remotes for every AGL gate motor, plus receivers, wireless wall buttons and Wi-Fi tools to manage remotes for a whole building.

AGL Gate remote controls
Remotes

One remote for every AGL operator.

The AGL 433 MHz remote is a four-button learning-code remote that works with every AGL gate motor, garage door operator and barrier. It runs on a CR2032 battery, measures 55 × 34 × 10 mm and comes in several colours, so each household or tenant can be told apart.

Every AGL motor already ships with two remotes. Extra remotes are learned onto the control board in a few seconds; the manual shows the button sequence.

Receivers and buttons

Add a second gate, a light or a wall button.

  • RX2C-433 receiver: two relay outputs with 50 m range, set as pulse, timed hold from 1 to 255 seconds, on/off or alarm. Use it to put a second gate, a light or a barrier on the same remotes.
  • BT-S wireless push button: a battery wall button that opens the gate with no wiring, for a reception desk, guard house or kitchen.
  • Izzy Open garage module: two channels on 433 MHz for garage door operators.
For buildings

Manage hundreds of remotes from a browser.

The Izzy Access receiver puts a building's 433 MHz remotes on AGL's free web platform: add, remove and back up remotes from a browser, with several receivers on one account. It suits property managers looking after compounds and towers, where lost remotes and moving tenants are routine.

To open the gate from the phone instead, see Wi-Fi gate control.

Gate remote FAQ

Will an AGL remote work with my gate motor?

AGL remotes work with every AGL operator. For another brand's motor, add an RX2C-433 receiver to the gate and the AGL remotes will drive it through the receiver's relay.

How do I add a new remote?

Put the control board into learning mode and press the remote button; the manual for your motor shows the sequence. An installer can also do it on a service visit.

I lost a remote. Can I delete it?

Yes. Clearing the board's memory and re-learning the remaining remotes removes it. With an Izzy Access receiver you delete just that remote from the web platform.

Do you sell remotes in bulk for buildings?

Yes. Send the quantity and colours on WhatsApp.

Have a gate to automate?

Send the gate type, weight and how often it opens. We reply with the right AGL operator, a price and the lead time from Dubai.